FLIPSKY V6.6 60A ESC W/ Aluminium Case for RC Drone E-bike E-scooter Robot

Worldwide Free shipping
Delivery date: 7 days
Availability: 94 in stock

FLIPSKY V6.6 60A ESC W/ Aluminium Case for RC Drone E-bike E-scooter Robot


FSESC6.6 with firmware version 3.37, compatible with Benjamin VESC TOOL, can be used for models, multi-axis aircraft, electric vehicles, electric skateboards, golf carts, smart cars, robots, and simple industrial position control.


- Measure current and voltage of all phases
- Regenerative braking
- Traction control (single and double settings)
- Sensor or sensorless operation + hybrid mode
- Configurable RPM, Current, Voltage and Power Limits
- Input source: PPM, simulation, NRF Nyko Kama Nunchuck
- Communication ports: USB, CAN, UART, NRF, BT
- Throttle curves and ramps for all input sources
- Separate acceleration and brake throttle curves
- Seamless four-quadrant operation
- Motor speed, ampere hours, watt hour count
- Instant data analysis and reading via communication port
- Adjustable different protections:
- Adjustable protection against: Low input voltage; high input voltage; high motor current; high input current; high regenerative braking current (separate limits for the motor and the input); High RPM (separate limits for each direction); Over temperature (MOSFET and motor)
-Using aluminum case with aviation-grade aluminum alloy material. It's anodized to ensure that it has good heat dissipation, while achieving IP65 waterproof level.
-The PCB increases heat dissipation and the over-current treatment process at key part--sunken sunroof, making the overall effect better and having more advantages!


Item brand: FLIPSKY
Item name: Electric speed control
Hardware: V 6.6
Firmware: V3.37
Voltage: 6V - 60V (Safe for 3S to 12S LiPo)
Voltage spikes may not exceed 60V
Current: Continuous 60A, Burst 150A. Values depend on the temperature and air circulation around the device
5V 1.5A output for external electronics
3.3V 1A output for external electronics
Modes: DC, BLDC, FOC (sinusoidal)
Supported sensors: ABI, HALL, AS5047
Size of aluminium case: 100 * 92 * 22.5mm

Package included:

1 * FSECS6.6 + Aluminium case
1 * USB micro Flash Charge VOCC Cable
1 * Mini Micro JST 2.0 PH 3-Pin Connector plug with Wires Cables
1 * Manual

Communication ports USB, CAN, UART, NRF, BT
Item brand FLIPSKY
Item name Electric speed control
Hardware V 6.6
Firmware V3.37
Supported sensors ABI, HALL, AS5047
Size of aluminium case 100 * 92 * 22.5mm